法拉第旋转器
Features
High Return Loss
High ExtinctionRatio
Low Insertion Loss
ExcellentEnvironmental Stability
Applications
Fiber Sensor
Fiber Amplifier
Fiber Lasers
Research
Specifications
Parameters | Unit | Values |
Center Wavelength (λc) | nm | 1310, 1480 or 1550 |
Operating Wavelength Range | nm | ±20 |
Typ. Insertion Loss | dB | 0.3 |
Max. Insertion Loss | dB | 0.5 |
Min. Return Loss | dB | 50 |
Rotation Angle at 23°C, λc | °C | 45±1 |
Max. Optical Power (CW) | mW | 500 |
Max. Tensile Load | N | 5 |
Operating Temperature | °C | -5 to +70 |
Storage Temperature | °C | -40 to +85 |
Parameters | Unit | Values |
Center Wavelength (λc) | nm | 980~1064 |
Max. Insertion Loss | dB | 0.8 |
Max. PDL | dB | 0.1 |
Rotation Angle at 23°C, λc | °C | 45±1 |
Max. Optical Power (CW) | mW | 500 |
Fiber Type | HI1060 | |
Max. Tensile Load | N | 5 |
Operating Temperature | °C | -5 to +70 |
Storage Temperature | °C | -40 to +85 |
*Abovespecifications are for devices without connectors.
*For devices withconnectors, IL will be 0.3dB higher, RL will be 5dB lower and ER will be 2dBlower.
*The PM fiber andthe connector key are aligned to the slow axis.
Ordering information
ILF-①①-②②-③③-④④-⑤
①①: Wavelength ③③: Fiber Jacket on Port 1 & 2 | ④④: Fiber Type on Port 1 & 2 | |
31 - 1310nm B - 250um Bare Fiber | 1 - PM Panda Fiber | |
48 - 1480nm D - 400um Bare Fiber | 2 - SMF-28e Fiber | |
55 - 1550nm L - 900um Loose Tube | ||
SS - Specify S - Specify | ⑤: Fiber Length | |
0.8 - 0.8m | ||
②②: Connector Type on Port 1 & 2 | S - Specify | |
1 - FC/UPC | ||
2 - FC/APC | ||
3 - SC/UPC | ||
4 - SC/APC | ||
N - None | ||
S - Specify |